How Do I Connect Jawbone To My Phone

Download Commodity

Download Article

Jawbone is an audio device company that focuses on wearable technology. Several popular Jawbone devices, such equally the Icon, Prime and Era headsets and Jambox speakers, can be paired with any Bluetooth enabled device. Find your device and follow the instructions below to pair Jawbone on your telephone.

ane

Turn on your telephone. Ensure your telephone has Bluetooth capabilities by looking in the Settings application for a Bluetooth selection. These instructions work for both Apple and Android phones.
ii

Charge your headset, as instructed by the manual. If information technology is uncharged, it volition be unable to pair.

Advertisement
three
Turn Bluetooth on in your phone settings.
- If you are using an Apple tree iPhone, go to Settings and look for Bluetooth under your Wi-Fi connectedness. Slide the radio push to "On."
- If you are using a pop Android phone, such every bit a Samsung Milky way, you will go to the Settings application and click on the Connections tab. Slide the push to "On."
iv
Plow on the Jawbone Icon or Prime headset. If yous are starting information technology for the kickoff time, it will go into pairing mode automatically.
- To place it into pairing mode manually, plough the headset off by sliding the power switch. Press down on the Talk button on the back of the headset and simultaneously slide the power switch on. Hold down the Talk button until the light flashes cherry and white. ^[one]
5
Look on your phone after 30 seconds to a minute. It should list all Bluetooth enabled devices in your area. Choose your Jawbone headset.
- If information technology doesn't appear, look for a Scan button nether the Bluetooth card.
6

Type in the universal lawmaking, if you lot are prompted to exercise and so. Information technology is 4 zeros.
7

Return to your main card and press your Talk push button to kickoff using your Icon or Prime.

1

Enable Bluetooth on your smart phone. Go to the Settings card and slide the Bluetooth switch to "On."
ii

Plough on your charged Jawbone Era headset. If you are turning it on for the commencement time, it will automatically go into pairing fashion and you tin can skip the next step.
3
Enable pairing fashion by turning the ability switch on. Shake the headset 2 times. The lite should flash cerise and white to signal it is in pairing style.
- You lot can also enable pairing way past using the aforementioned process every bit the Prime or Icon headsets.
iv

Go back to your phone and look for devices under the Bluetooth connections menu.
5

Cull your Jawbone Era on the list.
6

Blazon in the universal code, if your phone requires information technology. It is 4 zeros. ^[2]

1

Accuse your Jambox before you effort to plough information technology on. It will take about two.five hours to charge.
two
Prepare your phone or computer to pair with your speakers.
- If yous are using an iPhone, you will admission Bluetooth in the Settings menu, under Wi-Fi connections. Slide the push to plough information technology on.
- If you are using an Android, y'all will access it under the Settings menu in the tab labeled "Connections." Slide the button till information technology says "On."
- If you are using a Mac computer, open the System Preferences icon in your Applications folder. Expect for Bluetooth nether the Cyberspace & Wireless section. Check the box that says "On."
- If yous are using a Windows calculator, open the Commencement bill of fare and go to the Control Panel. Choose "Devices and Sounds" under the Hardware section. Select the option to "Add a device."
3

Turn on pairing manner on your speakers. The first time you turn the ability on, information technology volition enter pairing mode automatically. Later the commencement time, simply press down on the pairing push button until the calorie-free flashes reddish and white.
4

Return to your device. Press Browse if the Jawbone Jambox has not shown up on the list of devices. Click on the device when it appears.
v
Type in the universal lawmaking of 4 zeros, if you are prompted by your phone to type in a lawmaking.
- If you lot are using a Mac or Windows computer, click on the plus sign or "Add a Device" button. It will search for your device. Cull the device and type in the code.
- If you are using a Mac, you will need to close down the Bluetooth card and return to it to select the device for continued use.
- If you lot are using a Windows estimator, yous tin look for the device in your Devices section and so right click to select "Control and Connect."

Add together New Question

Question

My Jawbone icon is eight years sometime. I just paired information technology to my Samsung iii. I cannot get any book even when holding the book push. What should I practise?

Maybe you lot should reset the phone, the try an re-pair the headphones. You may need to repeat the process.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

You can turn your Bluetooth connection on and off to save bombardment. Your Jawbone device should save to your Bluetooth settings automatically. When you turn on your Bluetooth connection, you lot can tap the device below to ensure it is in working society.

Cheers for submitting a tip for review!

Nigh This Article

Thanks to all authors for creating a page that has been read 52,527 times.

Is this article upwards to date?